CuCrZr-PowerFil® was developed specifically to meet the requirements of AS22759, AS29606, NEMA WC 67, ASTM B 624, and MIL-DTL-25038, as environmentally friendly substitute for CuCdCr and CuCd0.1, which Lamifil will no longer produce. PowerFil® delivers a minimum strength of 414 MPa in combination of 7% elongation with a electrical conductivity of 90% IACS minimum, excellent flex life and thermal resistance. The CuCr1Zr has a higher tensile strength and is used for welding wire and 3D laser printing. The maximum oxygen content is 5 ppm.
| ELECTRICAL PROPERTIES (reference 1,8mm) | ||||
|---|---|---|---|---|
| Minimum electrical conductivity | % IACS | 90 | ||
| Average electrical conductivity | % IACS | 93 | ||
| Electrical resistivity | nOhmm | 19,16 | ||
| MECHANICAL PROPERTIES (reference 1,8mm) | ||||
| Minimum tensile strength | MPa | 414 | ||
| Average tensile strength | MPa | 450 | ||
| Elongation | % | 7 | ||
| PHYSICAL PROPERTIES (reference 1,8mm) | ||||
| Temperature coefficient | 10-3/K | 3,6 | ||
| Coefficient of thermal expansion | 10-6/K | 17,6 | ||
| Density | g/cm³ | 8,89 | ||
| CHEMICAL COMPOSITION (reference value) | ||||
| Cu | O2 | Zr | Cr | |
| balance | < 5ppm | 0,02% | 0,30% | |
| Standards | ||||
| ASTM B624 | ||||
| AS22759 | ||||
| AS29606 | ||||
| NEMA WC 67 | ||||
| MIL-DTL-25038 | ||||
| UNS number | ||||
| C18147 | ||||
| Product information is subject to change without notice and does not represent a commitment on the part of Lamifil NV. Lamifil NV assumes no responsibility for any errors that may appear in this information. | ||||
