Our lab offers a comprehensive range of accredited and non-accredited tests for overhead conductors according to standards including EN50182, IEC61089 and IEC61395. Our key offering of accredited tests includes the breaking load test, stress strain test, creep test, sag tension/temperature test, axial impact test and heat cycle test.
If needed, a cooperation with an external partner can be set up to allow for the most complete package of testing.
Aluminium, steel and copper wires | |
---|---|
Typical standards: | Diameter |
- EN 50182 | Tensile strength |
- EN 50540 | Stress at 1% extension |
- EN IEC 62420 | Elongation |
- EN IEC 62219 | Resistivity |
- IEC 61089 | Wrapping |
- EN 62004 | Torsion |
Bending | |
Thermal-resistant property | |
Welding | |
Mass of zinc | |
Zinc dip test | |
Adhesion of zinc coating | |
Cladding thickness/uniformity | |
Conductor | |
Typical standards: | Surface condition |
- EN 50182 | Diameter |
- EN 50540 | Inertness |
- EN IEC 62420 | Lay ratio |
- EN IEC 62219 | Direction of lay |
- IEC 61089 | Number and type of wires |
- IEC 61395 | Mass per unit length |
DC resistance | |
AC resistance | |
Stress strain | |
Tensile breaking strength | |
Stringing | |
Creep | |
Thermal expansion/CTE | |
Sheave | |
Radial crush | |
Torsional ductility | |
Sag temperature | |
Axial impact | |
Corrosion | |
Fault current | |
Temperature cycle | |
Tensile test | |
Dead ends, jumpers, rods, splices, sleeves | |
Typical standards: | Damage and failure load |
- IEC 61284 | Tensile test |
Corona/RIV | |
Heat cycle test/current cycling | |
Suspension clamps | |
Typical standards: | Damage and failure load |
- IEC 61284 | Slip |
Corona/RIV | |
Aeolian vibration | |
Galloping | |
Italic = accredited test |
Specialised in copper and copper alloy wires for railway applications, our lab masters a number of fundamental tests to assess their mechanical and electrical properties and performance. The main tests requested by our customers are the creep test for contact wires and the mechanical fatigue test for dropper wires.
If needed, a cooperation with an external partner can be set up to allow for the most complete package of testing.
Aluminium, steel and copper wires |
---|
Typical standards: EN 50182; EN 50540; EN IEC 62420; EN IEC 62219; IEC 61089; EN 62004 |
Diameter |
Tensile strength |
Stress at 1% extension |
Elongation |
Resistivity |
Wrapping |
Torsion |
Bending |
Conductor |
Typical standards: EN 50182; EN 50540; EN IEC 62420; EN IEC 62219; IEC 61089; IEC 61395 |
Surface condition |
Diameter |
Inertness |
Lay ratio |
Direction of lay |
Number and type of wires |
Mass per unit length |
Tensile breaking strength |
Creep |
Contact wire |
Typical standards: EN 50149; DIN 43140; DIN 43141; UIC 870; NF C 34 800; BS 23 |
Material composition |
Visual inspection |
Profiles and dimensions |
Electrical resistance |
Tensile test |
Elongation |
Reverse bending |
Torsional strength/torsion test |
Winding property/wrapping |
Mass per unit length |
Creep |
Hardness |
Wear |
Joints |
Dropper |
Typical standard: EN 50119 - NFC34 110 2 |
Mechanical fatigue test/cyclic bending |
Italic = accredited test |
We offer a range of specialised testing services for manufactures using wire rod, drawn and extruded wires, surface-treated wire, bunches and stranded conductors in aluminium, copper or their alloys. Our services allow them to ensure product quality and to improve or correct products and processes.
Aluminium, steel and copper wires |
---|
Typical standards: EN 50182; EN 50540; EN IEC 62420; EN IEC 62219; IEC 61089; EN 62004 |
Diameter |
Tensile strength |
Stress at 1% extension |
Elongation |
Resistivity |
Wrapping |
Torsion |
Bending |
Hardness |
Conductivity |
Chemical tests: wire composition |
Metallographical tests |
Oxygen level analysis |
Italic = accredited test |