Copper speciality wires

CuAg0,2

The recommended silver content depends on the required conductivity in combination with tensile strength. We can offer you the CuAg in four different Ag contents: Ag0,1%, Ag0,2% and Ag2%. CuAg has a very high conductivity, high tensile strength, high elongation, high corrosion resistivity, high flex life, bright and shiny surface, good weldability and solderability. Lamifil can offer this alloy with a maximum of 5 ppm Oxygen.

ELECTRICAL PROPERTIES (reference 1,8mm)
Minimum electrical conductivity% IACS96
Average electrical conductivity% IACS97
Electrical resistivitynOhmm17,96
MECHANICAL PROPERTIES (reference 1,8mm)
Minimum tensile strengthMPa490
Average tensile strengthMPa510
Elongation%1
PHYSICAL PROPERTIES (reference 1,8mm)
Temperature coefficient10-3/K3,77
Coefficient of thermal expansion10-6/K17,6
Densityg/cm³8,89
CHEMICAL COMPOSITION (reference value)
CuO2Ag
balance< 5ppm0,2%
Standards
Customer specific
Product information is subject to change without notice and does not represent a commitment on the part of Lamifil NV. Lamifil NV assumes no responsibility for any errors that may appear in this information.